Sanitary valves

Sanitary valves(13)

Shanghai Ansha Fluid Technology co.,ltd

All Products >> Sanitary valves

Showing 1 - 10 of 13, total 2 pages [First] [Previous] [Next] [Last]

multi-port diaphragm valve
Specification: 1/4"-4"
Detail: The diaphragm valves with different sizes could be combined together based on different service requirement. And also cusotmized multi-port diaphragm valve can be designed and manufactured based on the service process requirem...

sanitary diaphragm valve
Specification: 1/4"-4"
Detail: The sanitary diaphragm valve adopts weir structure body, with two way type, Bottom vessel type, three way type, multi-port type and PFA lined type. It can be customized according to the requirements. Valve body casted or forg...

sanitary butterfly valve
Specification: 1"~12"
Detail: The sanitary butterfly valve adopts concentric seal design. The valve body and disc adopt high quality forged stainless steel sourced from reputed suppliers. The valve parts are all CNC machined, the disc can be customized acc...

sanitary ball valve
Specification: 0.375"-12"
Detail: The Sanitary Ball Valve is applied to the fluid shutdown and flow control. Full bore design structure will allow the fluid to go through without any resistance. It is suitable to the liquid and pasted material transmission. O...

vessel discharge ball valve
Specification: 4"~12"
Detail: The Vessel Discharge Ball valve is connected with the bottom of vessel, with its full bore structure, excellent sealing performance and easy to diassembly cabability, Both liquid medium and the powders are available for handli...

aseptic rapid transfer port
Specification: 105mm / 190mm / 270mm / 350mm
Detail: Rapid Transfer Port, or Aseptic RTP, a device to transfer the materials to the controlled evironment. It is composed by the Alpha port and Beta part with transfer container. The Alpha port will be installed on the wall of the...

feeding ball valve
Specification: 4
Detail: The feeding ball valve is connected with the reactor, with its full bore structure, excellent sealing performance, easy to disassembly and clean capability, it can save the operating time and improve the production efficiency.

powder sampling valve
Specification: 0.5"~3"
Detail: Powder sample valve is used for dryer (cleaning, filtering and drying) sampling, There is a bellow in the valve body, The design will isolate the valve rotating parts and products to prevent the pollution. It is usually coop...

butterfly valve with inflatable seal
Specification: 2"~12"
Detail: When the butterfly valve is closed, the compressed air will inflate the seal to the disc to form the sealing between the seal and the disc. The compressed air is released before opening / closing of the valve. There will be no...

aspetic segment ball valve
Specification: 4"~12"
Detail: The working principle of Sanitary Segment Ball Valve: The compressed air will push the seal ring to the segement ball, and form seal between the valve body and the segement ball. Before the valve open or close, the compressed...


Showing 1 - 10 of 13, total 2 pages [First] [Previous] [Next] [Last]
1 2

Shanghai Ansha Fluid Technology co.,ltd All Products >> Sanitary valves

Shanghai Ansha Fluid Technology co.,ltd

All Products >> Sanitary valves